Electronics look like easy margin for a dropshipper: small parcels, steady demand, and a supplier catalog that runs to thousands of lines. They also carry three separate sets of rules that a bedding or homeware seller never meets. One set is about radio: does the device emit radio frequency energy, and if so has it been authorized by the Federal Communications Commission (FCC) before anyone sells it? One is about batteries: what the post office or a carrier will take, and what eBay will let you list. The last is about the safety logos on the product, which buyers and sometimes marketplaces treat as proof of something the law may not actually require.
This guide takes the three in turn, using the FCC's own rules, the Code of Federal Regulations, the Consumer Product Safety Commission (CPSC), the Postal Service and eBay's product safety policy. It also covers a new FCC rule on online marketplaces that the FCC adopted in July 2026 and published in the Federal Register on September 11, 2026 (effective October 13, 2026), because it changes what a listing may need to show.
The short version
- Under 47 CFR 2.803, no person may market a radio frequency device unless it holds a valid FCC authorization and is labeled as its authorization type requires. Marketing includes selling, offering for sale and advertising for sale.
- Most electronic devices need either certification (an FCC ID) or a Supplier's Declaration of Conformity (SDoC). Ask your supplier which applies, and ask for the evidence.
- A final FCC rule (FCC 26-50, published at 91 FR 57798 and effective October 13, 2026) requires online marketplaces to display the FCC ID of certified devices at the online point of sale, with compliance dates of March 1, 2027 and June 1, 2027.
- Lithium batteries have strict domestic mailing limits at the Postal Service, and eBay prohibits some battery items outright.
- UL, ETL and CSA marks show that a recognized lab certified a product to a standard. The CPSC says it has no mandatory standard for many electrical products, but eBay requires certain marks, so the mark can still decide whether you can list.
1. FCC authorization: the rule behind the FCC ID
The FCC's marketing rule is in 47 CFR 2.803. Under the version published by the Legal Information Institute (which, as we read it, shows the September 2026 amendment as a pending link), marketing is defined to include selling or leasing, offering to sell or lease, advertising for sale or lease, and importing, shipping or distributing for those purposes. The general prohibition says no person may market a radio frequency device unless it holds a valid FCC equipment authorization and meets the requirements of its authorization type. The statute underneath is 47 U.S.C. 302a(b), which says no person shall manufacture, import, sell, offer for sale or ship devices that fail to comply with the FCC's regulations. The statute makes an exception for carriers transporting devices without trading in them, and for devices made solely for export, among others.
Two points follow for a reseller. The rule is written about "any person" who sells or offers for sale, so being a small online seller is not an exemption. And the FCC's final rule summary says marketplaces that market unauthorized devices are subject to enforcement on the same basis as any other person, without a willfulness or knowledge element. The statute's wording has no intent test on its face, so do not assume that not knowing is a defense.
What counts as a radio frequency device
The term is wider than "wireless". The FCC's rule 47 CFR 15.101 lists equipment classes and the authorization each needs. Most digital devices, peripherals, power supplies, TV interface devices and receivers need either an SDoC or a certification grant, while scanning receivers, radar detectors and access broadband-over-power-line devices need certification. The table also lists personal computers and peripherals and external switching power supplies, so expect items such as these to carry FCC compliance information. Some products and some uses are exempt, and the rule points to exemption sections (15.23, 15.103 and 15.113). If you are unsure, the supplier's compliance document is the place to start.
2. Two routes: certification and SDoC
Section 2.803 sets out the requirement for each. A certification device is authorized under subpart J and must be properly identified and labeled under 47 CFR 2.925 and related sections. A Supplier's Declaration of Conformity device must comply with all applicable technical, labeling, identification and administrative requirements. A third group, devices that need no grant, must meet the technical standards before use.
Certified devices: the FCC ID
Under 47 CFR 2.925, each piece of certified equipment carries a label showing the FCC Identifier, preceded by the capital letters "FCC ID" on a single line, readable without magnification. The label must be permanently affixed and readily visible to the purchaser at the time of purchase, and "readily visible" means visible from outside the enclosure. A software-defined radio may show its FCC ID on a user display screen instead, and where a device is too small for a font of four points or larger and has no display, the rule puts the FCC ID in the user manual and either on the packaging or on a removable label. The label information may also be provided electronically under 47 CFR 2.935.
SDoC devices: the compliance statement
For SDoC the responsible party makes measurements or completes other procedures the FCC finds acceptable to ensure the equipment complies. Under 47 CFR 2.906 it does not have to submit a sample or data to the FCC unless the FCC asks, and the declaration applies to later-marketed items identical to the tested sample. Section 15.19 sets the labeling statement for devices subject to certification or SDoC: for most devices, a statement that the device complies with part 15 of the FCC Rules, followed by two conditions (the device may not cause harmful interference, and it must accept any interference received, including interference that may cause undesired operation). If the device is too small for the statement in four-point type and has no electronic label, the statement goes in the user manual and on the packaging or a removable label.
A worked supplier check (illustrative)
Say a supplier lists a Bluetooth speaker. You cannot see the product, so you ask three questions in writing:
- Is it certified or SDoC? If certified, what is the FCC ID?
- Can you send a photo of the label showing the FCC ID, or the compliance statement, on the product or packaging?
- Who is the responsible party, and can they provide the test report on request?
The Federal Register rule text refers to the FCC's Equipment Authorization System database as the place where a marketplace checks that an FCC ID was validly issued, and you can make the same check. If the ID does not exist in the database, or belongs to a different product, do not list the item. The same logic applies to a device that has no ID and no compliance statement at all.
Worth remembering: Section 2.803 also allows limited, conditional pre-authorization sales, but they require prominent disclosures, no delivery to end users before authorization is complete, and 60 months of records. That is a manufacturer's route for launches, not a way for a reseller to list stock that lacks an authorization.
3. The 2026 rule on online marketplaces and FCC IDs
On July 22, 2026 the FCC adopted a Third Report and Order in ET Docket No. 21-232 (FCC 26-50). The Federal Register published the final rule summary on September 11, 2026 (91 FR 57798) and gives its effective date as October 13, 2026. Among other things it:
- amends 47 CFR 2.803(a) to say that marketing includes listing regulated equipment on an online marketplace in combination with activities such as consignment, warehousing, inventory management, order processing, labelling, packaging, billing or fulfillment, even if a third-party seller sells it;
- requires online marketplaces to display a certified device's FCC ID at the online point of sale. Marketplaces that sell their own devices, or that have physical access to or take title to a third-party seller's device, must display a valid and accurate FCC ID, with compliance required from March 1, 2027;
- for marketplaces that list third-party devices without physical access or title, requires them to verify that the FCC ID supplied is validly issued and to require the seller to certify its accuracy, with compliance required from June 1, 2027;
- closes a "component part loophole" by prohibiting authorization of devices that incorporate logic-bearing hardware components produced by an entity on the FCC's Covered List, where the device would itself be prohibited had that entity produced it.
Who is excluded
The new display rule does not apply to listings published before the rule's effective date unless they are later amended or updated (a change to the description, images, specifications or seller information counts, while pricing or layout changes do not), to listings by sellers that are not "high-volume third-party sellers" as defined in the INFORM Consumers Act, or to listings for used devices. The FCC declined for now to require the FCC ID on external packaging.
What it means for an eBay seller
The rule is addressed to online marketplaces, not directly to sellers. We could not find eBay's own statement of how it will implement it, so we cannot say what eBay will ask of its sellers. What the rule makes plausible is a request to supply the FCC ID for certified devices, and a certification from you that it is accurate. If you do not already collect the ID from your supplier, start now, because you cannot certify what you do not have. The Covered List point is about components made by named Covered List entities, and the summary says it does not apply to production location-based entries unless the producing entity is itself on the list. Separately, the Federal Register summary says recent additions to the Covered List identify uncrewed aircraft systems, their critical components and routers "produced in a foreign country". Check the FCC's current Covered List before sourcing in those categories. The marketing prohibition in section 2.803 and the statute apply to sellers whatever eBay does.
4. Batteries: shipping rules, eBay rules and a CPSC rule
Mailing lithium batteries with the Postal Service
The Postal Service's Publication 52, section 349, sets domestic rules for lithium batteries. Each cell or battery must meet the UN Manual of Tests and Criteria, Part III, 38.3, and the outer packaging needs complete delivery and return addresses. The limits as we read them in October 2026:
| Battery type | Per-cell / per-battery limit | Installed in or packed with equipment | Without equipment |
|---|---|---|---|
| Lithium metal (non-rechargeable) | 1.0 g lithium per cell; 2.0 g per battery | Surface or air; up to 8 cells or 2 batteries; 5 kg (11 lb) at the upper range | Surface only; 5 lb |
| Lithium-ion (rechargeable) | 20 Wh per cell; 100 Wh per battery | Surface or air; up to 8 cells or 2 batteries | Surface only (limited Alaska exception); 5 lb |
Very small batteries (0.3 g of lithium metal or 2.7 Wh for lithium-ion) installed in equipment have no count limit but a 5.5 lb weight limit. Batteries must show a watt-hour rating. Damaged, defective or recalled batteries are prohibited unless approved, and used, damaged or defective electronic devices cannot go by domestic air. Mark requirements (UN3090, UN3091, UN3480, UN3481) depend on the type and packing. Carriers other than the Postal Service have their own rules, so check your carrier, and see our guide to shipping batteries and restricted items. Section 349 is long and updated by Postal Bulletin, so confirm the current text on Postal Explorer.
What eBay's policy says
eBay's product safety policy lists several battery rules. 18650 batteries are allowed only when pre-installed in a product and cannot be sold separately. Products with easily reachable button batteries are prohibited. For micromobility devices such as hoverboards, e-bikes and e-scooters, certification is required: UL 2272 for non-e-bikes, UL 2849 for e-bikes, UL 2271 for batteries sold separately, and UL standards for chargers designed for a specific device type and not marketed as universal. Used devices, batteries and chargers in that group are prohibited. Smoke and carbon monoxide detectors are limited to approved brands and safe models, and laser pointers must be 5 mW or less in an approved class. eBay's seller obligations include checking recall sources and confirming compliance with mandatory US standards.
The federal button battery rule
Under Reese's Law, the CPSC's button cell and coin battery rule (16 CFR part 1263) covers consumer products that contain or are designed to use these batteries. Per CPSC guidance, replaceable battery compartments must require a tool or at least two independent and simultaneous hand movements to open, the product packaging must carry a warning and so must the product where practicable, and batteries sold separately must use special packaging under 16 CFR 1700.15. The CPSC says certificates for these products must cite the specific provisions. That duty sits with the manufacturer or importer, but a product with a loose battery door and no warning is one to question before you list it. Our CPSC basics guide explains how the certificate system works.
5. UL, ETL and CSA: what the marks mean and what they do not
OSHA's Nationally Recognized Testing Laboratory (NRTL) program recognizes private organizations to certify certain products against workplace electrical standards. OSHA's page says each NRTL is recognized for a specific scope of test standards and uses its own registered certification mark, and that the mark signifies the NRTL tested and certified the product and that it complies with one or more appropriate product safety test standards. UL, ETL and CSA are marks of recognized labs, as the CPSC's guide for resellers notes.
The CPSC position
The CPSC's Resellers Guide, written by its Small Business Ombudsman, says the agency does not have mandatory standards for several electrical products, and still suggests looking for the certification mark of a recognized testing laboratory. For portable heaters and dehumidifiers it says to make sure there is a seal of a recognized lab and to destroy the item if not. For hoverboards it says there is no mandatory CPSC standard, that staff recommends the voluntary UL 2272 standard, and that the agency received reports of 283 self-balancing scooter fires or overheating incidents from December 1, 2015 through February 2, 2018, which it says overwhelmingly involved scooters that did not comply with the UL standard.
Put together: for many general-use electronics a UL, ETL or CSA mark is not a federal legal requirement, but it is the evidence the CPSC itself points to, it is what buyers look for, and it can be a marketplace condition. eBay's policy prohibits products missing required UL marking and sets standards for micromobility items. A listing that claims "UL listed" when the product has no such mark creates a different problem: an untrue claim. Our guide to the FTC rules for online sellers explains why claims need substantiation.
How to check a mark
- Ask for a photo of the mark on the product itself, not just an icon in the supplier's catalog.
- Ask for the lab's file or certificate number and the standard it covers.
- Check that the standard is the right one for the product, such as UL 2272 for a hoverboard, and not a component-level mark.
- Look up the lab on OSHA's list of recognized NRTLs.
6. A pre-listing checklist for electronics
- Does it plug in, charge or connect wirelessly? If yes, assume FCC rules apply and ask for the FCC ID or SDoC statement.
- Verify the ID. Search the FCC's database and match the product name and grantee.
- Check the Covered List for drones, routers and devices with components from named entities.
- Battery check. Type, watt-hour rating or lithium content, installed or separate, and whether eBay allows it.
- Safety mark check. Photo on the product, standard named, and any eBay requirement for the category.
- Recall check at cpsc.gov/recalls.
- Listing wording. State only what the evidence supports, and include the FCC ID where you have it.
- Keep records of every answer from the supplier. Our guide to eBay's dropshipping policy explains why listing accuracy is your responsibility.
Sellhelm, the eBay dropshipping software this blog belongs to, watches supplier price and stock, but it does not check regulatory status, so the steps above stay with you. If you are weighing categories, our guide to the best product categories for eBay dropshipping covers how electronics compare.
7. Common mistakes
- Assuming a CE mark is enough. CE is a European marking. FCC authorization is a separate US requirement, and nothing in the rules we read treats one as a substitute for the other.
- Copying an FCC ID from a lookalike product. The ID must belong to the device you are selling.
- Waiting for eBay to ask. Section 2.803 and the statute apply to sellers directly.
- Treating SDoC as "no paperwork". It is a declaration with a responsible party and required labeling.
- Ignoring battery limits. The Postal Service lists damaged, defective and recalled batteries as prohibited.
- Claiming a safety mark that is not on the product.
- Listing used electronics as if the new-device rules apply. The new FCC display rule excludes used devices, but the marketing rule and eBay's policy still apply.
Sources and how we checked
Facts in this guide were checked against these official pages in October 2026. Rules and figures change, so confirm anything that affects a decision. This is general information, not legal or tax advice.
- Protecting Against National Security Threats to the Communications Supply Chain Through the Equipment Authorization Program, final rule, 91 FR 57798, September 11, 2026 (Federal Register)
- FCC Fact Sheet, July 1, 2026, Equipment Authorization Program (Federal Communications Commission)
- 47 CFR 2.803, Marketing of radio frequency devices prior to equipment authorization (Legal Information Institute)
- 47 U.S.C. 302a, Restrictions (Legal Information Institute)
- 47 CFR 15.101, Equipment authorization of unintentional radiators (Legal Information Institute)
- 47 CFR 2.925, Identification of equipment (Legal Information Institute)
- 47 CFR 2.906, Supplier's Declaration of Conformity (Legal Information Institute)
- 47 CFR 15.19, Labeling requirements (Legal Information Institute)
- Publication 52, section 349, Class 9 Hazardous Materials (US Postal Service Postal Explorer)
- Button Cell and Coin Battery Business Guidance (US Consumer Product Safety Commission)
- Resellers Guide to Selling Safer Products (US Consumer Product Safety Commission)
- OSHA's Nationally Recognized Testing Laboratory (NRTL) Program (Occupational Safety and Health Administration)
- Product safety policy (eBay)
Questions people ask
Do I need FCC approval to sell electronics on eBay?
Under 47 CFR 2.803 no person may market a radio frequency device unless it holds a valid FCC authorization and meets the labeling rules for its type. Marketing includes selling and offering for sale. Ask your supplier whether the device is certified (FCC ID) or SDoC, and for the evidence.
What is the difference between an FCC ID and SDoC?
A certified device carries a label showing an FCC ID, preceded by the words FCC ID. An SDoC device is declared compliant by its responsible party, with no sample or data sent to the FCC unless requested. Part 15 labeling (47 CFR 15.19) applies to devices subject to either route.
What changed for online marketplaces in 2026?
The FCC adopted FCC 26-50 on July 22, 2026; it was published in the Federal Register on September 11, 2026 and is effective October 13, 2026. It requires marketplaces to display certified devices’ FCC IDs at the online point of sale, with compliance dates of March 1 and June 1, 2027. It excludes used devices and sellers that are not high-volume third-party sellers.
Can I mail lithium batteries with USPS?
Within limits. Publication 52 section 349 requires UN 38.3 testing and sets limits such as 20 Wh per lithium-ion cell and 100 Wh per battery, with surface-only rules for batteries without equipment. Damaged, defective or recalled batteries are prohibited. Confirm the current text on Postal Explorer.
Is a UL mark required by law?
The CPSC says it has no mandatory standards for several electrical products and suggests looking for a recognized lab mark such as UL, ETL or CSA. eBay’s product safety policy, however, prohibits products missing required UL marking and requires UL standards for micromobility devices.