Toys look like an easy category. The photographs sell themselves, demand never really goes away, and overseas suppliers offer plush animals, building sets and role-play kits at prices that make the margin look generous. But toys are the product type where the law is most specific about the buyer, because the buyer is a child who will put things in their mouth. The regulations are written around that fact, and they put real duties on every business that makes a toy available, including a seller who never touches the box.
This guide covers the Toys (Safety) Regulations 2011 as they apply in England, Scotland and Wales, with notes where Northern Ireland differs. It starts with the question that decides everything, which is whether your product is legally a toy. It then follows the chain from manufacturer to importer to distributor, sets out what a distributor has to check before listing, explains the warning rules (including a rule about what must be visible online), covers eBay's own restrictions, and ends with a supplier question list. Facts were checked in October 2026 against the sources listed at the end.
The short version
- The Toys (Safety) Regulations 2011 cover products designed or intended, even if not exclusively, for play by children under 14, according to GOV.UK's guidance last updated 24 March 2025.
- A distributor must take due care, must not supply a toy it has reason to think does not meet the essential safety requirements, and must verify the marking, identifying information, instructions and warnings before supplying.
- Sell a toy under your own name or trademark, or alter it so that safety could be affected, and the regulations treat you as the manufacturer.
- Warnings must be in English, begin with the word "Warning" or "Warnings", and any warning that affects the decision to buy, such as a minimum or maximum age, must be visible before purchase, including online.
- Penalties can include unlimited fines in England and Wales, up to £10,000 in Scotland, up to six months in prison, or both, according to GOV.UK.
- OPSS safety reports show small parts that detach, such as a plush toy's nose, being caught at the border and on marketplaces.
1. Is it legally a toy?
The regulations apply to toys designed or intended, whether or not exclusively, for use in play by children under 14. The test is design and intention, not what the packaging calls it. Schedule 1 lists products that are not considered toys, and many sellers are surprised by the list. It includes decorative objects for festivities and celebrations, collector products labelled for ages 14 and over (such as detailed scale models, scale-model kits and folk and decorative dolls), puzzles with more than 500 pieces, babies' soothers, electronic equipment such as game consoles unless specially designed for children with standalone play value, interactive leisure software, and fashion accessories for children that are not for use in play.
That does not mean the excluded products are unregulated. GOV.UK says the General Product Safety Regulations 2005 cover consumer products generally, and our guide to UK product safety for online sellers explains the duties that apply. The toy regulations are simply the stricter, more specific layer for products that are toys. If you are unsure which side a product falls on, ask your local trading standards service before you list. Do not decide on the basis of what the supplier's description says.
2. What "safe" means for a toy
GOV.UK's guidance says toys, including their chemicals, must not endanger users or third parties when used as intended or in a foreseeable way, taking children's behaviour into account. The abilities of users and any supervisors must be considered, especially for toys for children under 36 months. Schedule 2 of the regulations then sets particular requirements. The headline points, drawn from the legislation text, are:
- Physical and mechanical. Toys clearly meant for children under 36 months, and toys intended to go in the mouth, together with their parts, must be of a size that prevents them being swallowed or inhaled. Toys must not present strangulation or airway-blockage risks, and retail packaging must not either. A toy firmly attached to a food product so that the food must be eaten to reach the toy is prohibited.
- Flammability. A toy must not be a dangerous flammable element in a child's environment, and must not be explosive or contain elements likely to explode in use.
- Chemical. Toys must not pose chemical risks to health in intended or foreseeable use. Certain carcinogenic, mutagenic or reprotoxic substances are generally banned, with exceptions, and the schedule sets migration limits for elements such as lead, mercury, arsenic and cadmium. Listed allergenic fragrances must not be present beyond unavoidable traces, and a second list of fragrances must be labelled if present above a stated level.
- Electrical. Toys must not be powered by more than 24 volts DC or the equivalent AC voltage, with some exceptions for internal voltages that do not create a shock risk, and the transformer must not be built into the toy.
- Hygiene. Toys for children under 36 months must be cleanable, and textile toys must be washable unless a mechanism could be damaged by soak washing.
GOV.UK also publishes the designated standards for toy safety. Its page lists notices of publication, the latest dated 13 February 2026, and a consolidated list (version 6, 17 February 2026). The page we read did not name individual standards, so look at the list itself or ask the supplier which standards were used.
3. The chain: manufacturer, importer, distributor
As with most product laws, the regulations describe roles. GOV.UK's guidance sets them out.
Manufacturer
The manufacturer designs the toy to meet the essential requirements, carries out a safety assessment and the applicable conformity procedure, draws up a declaration of conformity, and affixes the conformity marking. They prepare technical documentation and keep it, with the declaration, for 10 years. They put identifying details (type, batch, serial or model number) and their own name and address on the toy or packaging, sample-test marketed toys, investigate and log complaints, correct, withdraw or recall non-conforming toys, and notify enforcement authorities of safety risks.
Importer
An importer is a UK-based person who brings a toy into Great Britain from outside the UK. They check that the manufacturer has completed the conformity procedure and the marking, mark their own name, trade name or trademark and postal address on the toy (or on the packaging or an accompanying document where that is not possible), and keep the declaration of conformity and technical documentation for 10 years. GOV.UK adds that until 31 December 2027 importers of goods from the EEA or Switzerland may give their details on packaging or accompanying documents rather than on the toy, and that a company website can supplement this but not replace it.
Distributor
This is where most eBay sellers sit. We cover the distributor duties in the next section, because they decide whether you can list.
When you become the manufacturer
Regulation 37 says a distributor takes on the manufacturer's obligations in two situations: it sells a toy under its own name or trademark, or it alters a toy already on the market in a way that could affect whether the toy meets the essential safety requirements. In those cases it must carry out every duty the regulations impose on manufacturers. Private label and white-label toys are therefore a very different undertaking from reselling a branded toy. You would need a safety assessment, a declaration of conformity and technical documentation, and you would need to be able to produce them.
4. What a distributor must check before supplying
Regulation 33 sets out the distributor's pre-supply duties. Paraphrased from the legislation:
- Take due care that any toy you intend to supply complies with the regulations.
- Do not supply a toy if you have reason to think it will not meet the essential safety requirements throughout its expected normal use.
- Verify before supply that the manufacturer has affixed the required marking (the UK marking in England, Wales and Scotland, or the CE marking in Northern Ireland), has provided identifying information about the toy and itself, and has supplied instructions, safety information and warnings, and that any importer has provided its identifying information.
- Follow the storage and transport rules in regulation 34, so that storage or transport does not affect compliance.
In practice, "verify" means looking at the product, its packaging and the paperwork. You are not expected to repeat laboratory testing, but you are expected to notice that a marking is missing, that there is no manufacturer or importer address, that the warnings are not in English, or that a toy for babies has parts that are obviously small enough to swallow. For a dropshipper who never handles the item, the usual workable approach is to receive a sample before you list, and to get photographs of the product, label and packaging from the supplier in writing.
If you suspect a problem
Regulation 35 sets out what a distributor must do. Before supplying: if you suspect that a toy you plan to sell would fail the essential safety requirements in normal, foreseeable use and would pose a danger, you must alert the importer or, if there is none, the manufacturer, and you must also alert the relevant enforcement authority. After supplying: if you suspect any rule was broken for a toy you have sold, you must act without delay, fixing the problem or withdrawing or recalling the toy where appropriate, and if the toy is dangerous you must tell the enforcement authority about the danger, the rule broken and the fixes made. An enforcement authority can also ask you to help remove a risk.
Knowing your supply chain
Under regulation 38 an enforcement authority can ask a business to identify any business that supplied it with a toy and any business it has supplied a toy to. The legislation sets a 10-year limit: for a manufacturer it runs from when the toy was placed on the market, and for any other operator from when that operator was supplied with the toy. Keep your supplier invoices, supplier contact details and order records for toys for at least that long. If your records vanish when you switch tools or suppliers, you will not be able to answer. See also backing up the records your business depends on.
5. CE, UKCA and what the marking means
GOV.UK's guidance explains that for toys assessed by the manufacturer themselves (self-declaration), either UKCA or CE can be affixed before the toy is placed on the market in Great Britain, and both can be used if both sets of requirements are met. CE stays mandatory for the EEA and Northern Ireland markets. Where a third-party assessment was needed, the rules depend on the type of body involved. From 1 October 2024, UKCA is allowed (and not CE) where an EU notified body completed the assessment, or began it and a UK approved body finished it.
The marking should be visible, legible and indelible, on the toy, a label or the packaging. Where that is not feasible, a label that is not attached to the toy, or an accompanying leaflet, can be used. Until 31 December 2027, UKCA marks may be placed on a label or accompanying document even where they could go on the toy.
The marking is the manufacturer's declaration, not proof. A toy with a mark but with no manufacturer address, no declaration of conformity available and no English warnings is a toy you should not list.
6. Warnings, wording and what must be visible online
Regulation 20 and Schedule 5 together govern instructions and warnings. The rules, taken from the legislation, are specific.
- Warnings, instructions and other information must be in English and must be clear, easy to read, understandable and accurate. They can appear on the toy, on a label, on the packaging or in the instructions.
- Each warning must begin with the word "Warning" or "Warnings".
- Warnings required under points 2 to 10 of Part B of Schedule 5 must be reproduced word for word.
- Any warning that affects the decision to buy the toy, such as a minimum or maximum age, must be visible to the buyer before purchase, and the regulation says this applies to online sales too.
The last point is the one most relevant to a listing. If a product's age limit is on the box but your eBay listing never mentions it, you may be failing to put a purchase-affecting warning in front of the buyer. Put the age limit and key warnings in the title or description, and use the item specifics fields that exist for age range. See item specifics: the field everyone rushes.
What Schedule 5 requires for specific toy types
| Toy type | Required warning or information (paraphrased from Schedule 5) |
|---|---|
| Any toy where needed for safe use | User limits stating at least the minimum or maximum age, and where relevant abilities, weight limits and adult supervision |
| Toys that could be dangerous for under 36 months | A warning such as "Not suitable for children under 36 months", or a pictogram, with a brief note of the specific hazard |
| Activity toys | "Only for domestic use", plus instructions on checks, assembly and a suitable surface |
| Functional toys (scale models or imitations of appliances) | "To be used under the direct supervision of an adult" |
| Skates, skateboards, scooters and toy bicycles sold as toys | Packaging warning to wear protective equipment and not to use in traffic |
| Aquatic toys | Warning that they should be used only in water where the child can stand safely, under adult supervision |
| Toys in or mixed with food | "Toy inside. Adult supervision recommended." |
| Toys strung across a cradle, cot or pram | Entanglement warning on packaging and permanently on the toy |
| Fragrance in cosmetic kits, olfactory games and similar | "Contains fragrances that may cause allergies." |
Schedule 5 also covers chemical toys, imitation protective masks and helmets, and other categories, and it makes exceptions where a warning would conflict with the toy's intended use. Treat the table as an orientation and read the schedule for your product.
7. Who counts as a seller, and what about second-hand toys?
GOV.UK's guidance says the regulations apply to anyone acting "in the course of a commercial activity", whether paid or free. It says occasional jumble or car boot sales are unlikely to count, but a parent who sells used toys occasionally on social media is unlikely to be covered while a regular seller on an online marketplace likely is. If you are an eBay business seller you should assume you are covered.
The page does not set out separate rules for second-hand toys beyond that. The General Product Safety Regulations cover new, used and reconditioned products supplied commercially, so a used toy still has to be safe. eBay's own policy goes further for particular items, as the next section shows. For a dropshipper, this question seldom arises because your stock is new.
8. eBay's rules for toys and related items
eBay UK's product safety policy says listings must meet safety rules in every country where they are posted, that baby toys must meet CE or UKCA toy safety regulations, and that products requiring CE or UKCA marking must display it, with documentation available on request. It lists several items that bear directly on toy sellers:
- Toy magnets, and small magnets sold outside the fasteners category, are not allowed.
- Products with easily reachable button batteries are not allowed, and products containing button batteries must meet PAS 7055.
- Coloured sand, play sand and sand-filled toys or products are not allowed in or shipped to the UK.
- Water beads are not allowed in categories other than Home and Garden decorations, or if advertised for children.
- Certain baby products are not allowed, including inclined sleepers, cot bumpers, weighted blankets, loungers and sleep positioners.
The same page says that when an item is reported as recalled or unsafe it is removed from the affected site and may be removed from all eBay sites, and it tells sellers to check the manufacturer's website and official recall sites before listing. The policy changes, so read the live page. The page names removal of the listing, a warning, restricted activity or account suspension as possible actions, as we explain in how to avoid an eBay account suspension.
9. What enforcement looks like in practice
OPSS publishes product safety reports on GOV.UK. Two examples from 2026 show the kinds of defect that get caught.
- A green plush toy sold via eBay (published 3 June 2026) had a nose that could easily detach, forming a small part, rated a serious risk for children under 36 months and in breach of the Toys (Safety) Regulations 2011. The import was rejected at the border, and the report records the listing as removed by another marketplace, AliExpress; it does not say that eBay removed a listing.
- A toy cash register set (published 15 January 2026) had a plastic strawberry that fits entirely within a small parts cylinder and could be mistaken for real food, and a plastic packaging bag too thin to meet minimum thickness requirements. The report cites the Toys (Safety) Regulations 2011 and the Food Imitations (Safety) Regulations 1989, and records the import as rejected at the border.
The common thread is that the defects are physical and visible. A detachable part, a thin bag or a missing label is something a distributor could have spotted by examining a sample. That is what "due care" and "verify before supply" amount to in practice.
10. Penalties and powers
GOV.UK says local trading standards authorities enforce the regulations in Great Britain, and the Secretary of State is also an enforcer. Authorities can issue compliance, withdrawal and recall notices, and may restrict or prohibit supply of toys posing a serious risk. Enforcers follow the Regulators' Code, which favours proportionate action and dialogue unless immediate action is needed. The guidance gives the penalties as unlimited fines in England and Wales, up to £10,000 in Scotland, a maximum of six months' imprisonment, or both. Our guide to what Trading Standards actually does explains how a visit or request typically unfolds.
11. What may change
The government has launched a wider consultation on the core product safety framework, covered in our general product safety guide, and a separate toy safety call for evidence. GOV.UK says the call for evidence was announced on 6 July 2026, covers emerging risks including chemical safety and AI-enabled toys, applies to toys bought online as well as in shops, and was to close on 6 October. The page does not set out specific legal changes, because the call for evidence gathers views first. Until new rules are made, the 2011 regulations are what apply. Check GOV.UK for the outcome.
12. A supplier question list for toys
Put these to a supplier in writing before you list any toy, and keep the replies.
- Who is the manufacturer, and what is their name and postal address? Who is the UK importer, if any?
- Can you supply the declaration of conformity and say which marking (UKCA or CE) is used?
- What age range is the toy designed for, and is it suitable for children under 36 months?
- Can I see clear photographs of the toy, label, packaging and instructions, with the warnings in English?
- Does the toy contain small or detachable parts, magnets, button batteries or loose beads?
- Which standards was it tested against, and can I have the test report?
- If I receive a complaint, who will deal with it and how fast?
Order a sample, handle it, and look at what a child could pull off. If the supplier will not answer, the regulations place the cost of that silence on you, not on them.
13. Common mistakes
- Assuming a CE or UKCA mark ends the checking. The mark is the manufacturer's declaration, and you must still verify identifying details, instructions and warnings.
- Branding a toy. Regulation 37 treats you as the manufacturer.
- Leaving the age limit out of the listing. The regulation says purchase-affecting warnings must be visible before purchase, online included.
- Warnings in the wrong language or wording. They must be in English, begin with "Warning", and certain wording must be word for word.
- Ignoring eBay's restricted items. Magnets, sand, water beads and accessible button batteries are the obvious ones.
- Not keeping records. The 10-year supply-chain identification period means your invoices matter.
- Listing from a photo only. The OPSS cases show defects that a sample would have revealed.
Sellhelm, the eBay dropshipping software this blog belongs to, watches supplier price and stock, but none of the safety checks above can be automated away. This is general information, not legal advice.
Sources and how we checked
Facts in this guide were checked against these official pages in October 2026. Rules and figures change, so confirm anything that affects a decision. This is general information, not legal or tax advice.
- Toys (Safety) Regulations 2011: Great Britain (GOV.UK)
- The Toys (Safety) Regulations 2011, contents (legislation.gov.uk)
- Schedule 1, products that are not toys (legislation.gov.uk)
- Schedule 2, particular safety requirements (legislation.gov.uk)
- Schedule 5, warnings (legislation.gov.uk)
- Regulation 20, instructions, safety information and warnings (legislation.gov.uk)
- Regulation 33, distributor duty of care (legislation.gov.uk)
- Regulation 35, non-compliant toys and toys presenting a risk (legislation.gov.uk)
- Regulation 37, duty to comply with manufacturers' duties (legislation.gov.uk)
- Regulation 38, identification of economic operators (legislation.gov.uk)
- Designated standards: toy safety (GOV.UK)
- Product Safety Report: green plush toy (OPSS, GOV.UK)
- Product Safety Report: toy cash register set (OPSS, GOV.UK)
- Call for evidence on toy safety and AI-enabled toys (GOV.UK)
- Product safety policy (eBay UK)
Questions people ask
What is legally a toy in the UK?
The Toys (Safety) Regulations 2011 cover products designed or intended, whether or not exclusively, for play by children under 14. Schedule 1 lists exclusions, including collector products labelled 14 and over, puzzles with more than 500 pieces and babies' soothers.
What must I check before I list a toy?
Regulation 33 says a distributor must take due care, must not supply a toy it has reason to think is unsafe, and must verify that the manufacturer has applied the marking and supplied identifying information, instructions and warnings, and that any importer has given its details.
Do toy warnings have to appear on my eBay listing?
Regulation 20 says a warning that affects the decision to buy, such as a minimum or maximum age, must be visible to the buyer before purchase, and that this applies to online sales. Warnings must be in English and begin with the word Warning.
When do I become the manufacturer of a toy?
Regulation 37 says a distributor takes on the manufacturer's duties if it sells a toy under its own name or trademark, or alters a toy already on the market in a way that could affect compliance with the essential safety requirements.
Can I use CE marking or do I need UKCA?
GOV.UK says that for self-declared toys either UKCA or CE can be affixed before placing them on the Great Britain market, and both can be used. CE stays mandatory for the EEA and Northern Ireland. Until 31 December 2027 UKCA can be on a label or accompanying document.
What are the penalties?
GOV.UK gives them as unlimited fines in England and Wales, up to 10,000 pounds in Scotland, a maximum of six months' imprisonment, or both. Authorities can also issue compliance, withdrawal and recall notices.